 |
|||
|
|
|||
|
Page Title:
INTER-AXLE DRIVELINE REMOVAL - CONTINUED |
|
||
| ||||||||||
|
|
 TM 9-2320-303-24-1
DRIVELINE REPLACEMENT - CONTINUED
0116 00
INTER-AXLE DRIVELINE REMOVAL - CONTINUED
NOTE
Perform following steps at front end of inter-axle driveline.
1.
Remove two screws (8) from each of two bearing caps (7). Discard screws.
2.
Remove two bearing caps (7) from universal joint of inter-axle driveline (6).
6
8
7
9
10
NOTE
Perform following steps at rear end of inter-axle driveline.
3.
Remove two screws (10) from each of two bearing caps (9). Discard screws.
4.
Remove two bearing caps (9) from universal joint of inter-axle driveline (6).
5.
Remove inter-axle driveline (6) from vehicle.
MAIN DRIVELINE INSTALLATION
NOTE
Perform following steps at rear end of main driveline.
1.
Position main driveline (1) to vehicle.
2.
Install two bearings straps (5) and four screws (4) to universal joint of main driveline (1). Tighten screws to 125 lb-ft
(170 Nm).
NOTE
Perform following step at front end of main driveline.
3.
Install two bearing straps (2) and four screws (3) to universal joint of main driveline (1). Tighten screws to 125 lb-ft
(170 Nm).
4.
Lubricate driveline (WP 0024 00).
0116 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals