 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
TRANSMISSION OIL COOLER LINES AND FITTINGS REPLACEMENT - CONTINUED
0115 00
INSTALLATION - CONTINUED
2.
Install two elbow fittings (14 and 15) to transmission oil cooler (21) and tighten jamnuts (18 and 19).
3.
Position transmission oil cooler lines (8 and 9) to vehicle.
4.
Connect transmission oil cooler lines (8 and 9) to two elbow fittings (14 and 15).
WARNING
Adhesive and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If adhesives
or sealing compound contacts skin or clothing, wash immediately with soap and water.
5.
Apply pipe sealing compound to threads of elbow (17) and install elbow to elbow (14).
6.
Connect transmission oil sample line (16) to elbow (17).
NOTE
Perform steps 7 through 11 at front of transmission.
7.
Install two new preformed packings (11) to elbow fitting (13) and fitting (23).
8.
Install elbow fitting (13) and fitting (23) to transmission (24) and tighten jamnuts (12 and 22).
9.
Connect transmission oil cooler lines (8 and 9) to fitting (23) and elbow fitting (13).
10.
Apply pipe sealing compound to threads of temperature sensor (1) and install temperature sensor to elbow fitting (13).
11.
Install wire terminal (2) to temperature sensor (1) with nut (3).
NOTE
Perform steps 12 and 13 to attach two transmission oil cooler lines to each of four support brackets.
12.
Position clamps (10) around transmission oil cooler lines (8 and 9).
13.
Install clamp (10) to support brackets (7) with screws (6), washer (5), and nut (4). Install new tiedown straps as neces-
sary.
14.
Fill transmission oil (WP 0109 00).
END OF WORK PACKAGE
0115 00-3/(0115 00-4 blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals