 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
BATTERY BOX REPLACEMENT - CONTINUED
0096 00
REMOVAL - CONTINUED
NOTE
Perform step 3 at each side of battery box.
4.
Remove three nuts (17), six washers (15), three bolts (14), and bracket (13) holding battery box (1) on bracket (11).
5.
Remove battery box (1) from vehicle and remove four plywood liners (10).
NOTE
Perform step 6 to remove each of two brackets from vehicle.
6.
Remove four nuts (9), washers (12), bolts (16), and bracket (11) from vehicle.
INSTALLATION
NOTE
Perform step 1 to install each of two brackets to vehicle.
1.
Install bracket (11) on vehicle with four bolts (16), washers (12), and nuts (9).
2.
Install four plywood liners (10) in battery box (1).
3.
Using suitable jack, position battery box on two brackets (11).
NOTE
Perform step 4 at each side of battery box.
4.
Install battery box (1) and bracket (13) on bracket (11) with three bolts (14), six washers (15), and three nuts (17).
5.
Remove jack from battery box (1).
NOTE
Perform step 6 and 7 at each side of battery box.
6.
Install bracket (4) with bolt (6), washer (3), and new kep nut (2).
7.
Install rubber latch (7) on battery box (1) with bolt (8), and nut (5).
8.
Install NATO slave receptacle (WP 0075 00).
9.
Install left step (WP 0164 00).
10.
Install battery hold-down pins and batteries (WP 0094 00).
11.
Install master battery switch (WP 0106 00).
0096 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals