 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
OIL PRESSURE SENDING UNIT REPLACEMENT - CONTINUED
0089 00
REMOVAL - CONTINUED
NOTE
If it is necessary to remove cab air junction block, perform removal steps of Cab Air Junction Block
Replacement (WP 0141 00).
3.
Depress collar (10) and disconnect air line (9).
4.
Remove fitting (11) from cab air junction block (12).
5.
Disconnect electrical connector (8).
6.
Remove oil pressure sending unit (7) from lower right side of cab air junction block (12).
7
12
8
9
11
10
INSTALLATION
WARNING
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin
and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If
adhesives or sealing compound contacts skin or clothing, wash immediately with soap and water.
Ensure that all air lines and fittings are clear of debris and excess pipe sealing compound does not enter
air lines or fittings. Failure to follow this warning could result in injury to personnel or damage to equip-
ment.
0089 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals