 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
BRAKE LIGHT/TRAILER BRAKE LIGHT SENDING UNIT REPLACEMENT - CONTINUED
0087 00
REMOVAL - CONTINUED
NOTE
Tag electrical wires to aid in installation.
3.
Remove two locknuts (5) and electrical wires (6 and 7) from brake light/trailer brake light sending unit (4). Discard
locknuts.
4.
Remove brake light/trailer brake light sending unit (4) from elbow (3).
4
5
3
6
7
INSTALLATION
WARNING
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin
and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If
adhesive or sealing compound contacts skin or clothing, wash immediately with soap and water.
Ensure that all air lines and fittings are clear of debris and excess pipe sealing compound does not enter
air lines or fittings. Failure to follow this warning could result in injury to personnel or damage to equip-
ment.
1.
Lightly coat threads of brake light/trailer brake light sending unit (4) with pipe sealing compound. Install sending unit
on elbow (3).
2.
Install two electrical wires (6 and 7) on brake light/trailer brake light sending unit (4) with two new locknuts (5).
0087 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals