|
|
TM 9-2320-303-24-1
HEATER CONTROL PANEL REPLACEMENT - CONTINUED
0069 00
REMOVAL
1.
Remove two heater control knobs (3) and six screws (1). Pull control panel (2) out from dashboard.
2.
Remove fiber optic label (13).
NOTE
Tag all tubes and connectors prior to removal to aid in installation.
3.
Remove two nuts (17), two washers (16), and two terminal lugs (15) from switch (14).
4.
Loosen two setscrews (10) and remove knob (11), nut (12), and switch (14) from control panel (2).
5.
Disconnect six connectors (19).
6.
Remove nut (9) and mirror heat switch (18) from control panel (2).
7.
Remove heater indicator light (20).
8.
Remove two nuts (7) and auxiliary heater switches (21).
9.
Press three plastic discs (23) and disconnect three tubes (22) from air switch (24).
10.
Remove air switch (24).
11.
Loosen two setscrews (6) and remove knob (5), nut (4), and fan speed switch (25).
12.
Remove indicator light (26).
13.
Remove ac/heater panel (27) and two label holders (8) from control panel (2).
INSTALLATION
1.
Install two label holders (8) and ac/heater panel (27) to control panel (2).
2.
Install indicator light (26).
3.
Install fan speed switch (25), nut (4), and knob (5). Tighten two setscrews (6).
4.
Install air switch (24).
5.
Press three plastic discs (23) and connect three tubes (22) to air switch (24).
6.
Install two auxiliary heater switches (21) and two nuts (7).
7.
Install heater indicator light (20).
8.
Install mirror heat switch (18) with nut (9).
9.
Connect six connectors (19).
10.
Install switch (14), nut (12), and knob (11). Tighten two setscrews (10).
11.
Install two terminal lugs (15), two washers (16), and two nuts (17) on switch (14).
12.
Install fiber optic labels (13).
13.
Install control panel (2) to dashboard with six screws (1). Install two heater control knobs (3).
14.
Start vehicle and check all control panel functions (TM 9-2320-302-10).
0069 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |