 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
LEFT PANEL GAGES AND LAMPS REPLACEMENT - CONTINUED
0062 00
REMOVAL
1.
Remove four screws (8) and pull panel (7) away from dashboard.
2.
Remove three lamp holders (2) from engine oil pressure gage (9), engine water temperature gage (10), and voltmeter
(11).
NOTE
Tag all plugs and tubes to aid in installation.
3.
Remove two plugs (1), connector (13), and two tubes (3) from engine oil pressure gage (9), engine water temperature
gage (10), and voltmeter (11). Remove panel (7).
NOTE
Note location of gages to aid in installation.
4.
Remove two locknuts (5), bracket (6), and engine oil pressure gage (9) from panel (7).
5.
Repeat step 4 for engine water temperature gage (10) and voltmeter (11).
6.
Remove air vent (12) from panel (7).
7.
Turn three lamps (4) to left and remove from lamp holders (2).
INSTALLATION
1.
Install three lamps (4) in lamp holders (2). Turn lamps to right to lock in place.
2.
Install air vent (12) on panel (7).
3.
Install engine oil pressure gage (9) and bracket (6) on panel (7) with two locknuts (5).
4.
Repeat step 3 for engine water temperature gage (10) and voltmeter (11).
5.
Install three lamp holders (2) on engine oil pressure gage (9), engine water temperature gage (10), and voltmeter (11).
6.
Install two tubes (3), connector (13), and two plugs (1) on engine oil pressure gage (9), engine water temperature gage
(10), and voltmeter (11).
7.
Install panel (7) on dashboard with four screws (8).
8.
Run vehicle and build air pressure to proper level (TM 9-2320-303-10). Check operation of gages and check for air sys-
tem leaks.
0062 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals