 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
STARTER MOTOR MAINTENANCE - CONTINUED
0060 00
REMOVAL
1.
Remove two hex nuts (9) and washers (8).
2.
Remove three wires (10), two cables, and ground strap (7).
3.
Remove three bolts (1) and washers (2).
4.
Remove starter motor (6).
5.
Remove gasket (3), spacer (4), and gasket (5). Discard gaskets.
1
2
10
3
4
10
(WIRE 17)
5
9
8
STARTER
10
6
9
(WIRE 46B)
8
BLACK
BATTERY
CABLE
7
STARTER
MOTOR
402-214
INSTALLATION
1.
Align and install new gasket (3), spacer (4), and new gasket (5) on starter motor (6).
2.
Align and install starter motor (6).
3.
Install and tighten three washers (2) and bolts (1).
4.
Install three wires (10), two cables, and ground strap (7) on starter motor (6) according to figure.
5.
Install and tighten two washers (8) and hex nuts (9).
OPERATIONAL CHECK
1.
Start engine (TM 9-2320-303-10).
2.
Verify that starter motor (6) engages.
END OF WORK PACKAGE
0060 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals