 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
AIR CLEANER, PRE-CLEANER, AND DUCT ASSEMBLY REPLACEMENT - CONTINUED
0032 00
REMOVAL
1.
Loosen clamp (14), four clamps (1), and clamp (3).
2.
Remove tube (15), two tubes (16), tube (17), and tube (2).
3.
Remove tube (7) and elbow (6).
4.
Remove four nuts (12), four washers (5), and four screws (4).
5.
Remove eight bushings (10), eight screws (8), and air cleaner assembly (13) from brackets (9 and 11).
INSTALLATION
1.
Position air cleaner assembly (13) on brackets (9 and 11).
2.
Install eight screws (8) and eight bushings (10).
3.
Install four screws (4), four washers (5), and four nuts (12).
4.
Apply pipe sealing compound on elbow (6) and install elbow and tube (7).
5.
Connect tube (2) to air cleaner assembly (13) with clamp (3).
6.
Connect tube (16) to tube (2) with clamp (1).
7.
Connect tube (17) to tube (16) with clamp (1).
8.
Connect tube (16) to tube (17) with clamp (1).
9.
Connect tube (15) with clamp (1) and clamp (14).
0032 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals