CODE 46 XX -- OVERCURRENT TO SOLENOIDS

WTEC III ELECTRONIC CONTROLS TROUBLESHOOTING MANUAL

CODE 46 XX -- OVERCURRENT TO SOLENOIDS (Figure 520)

Main code 46 indicates that an overcurrent condition exists in one of the switches sending power to the

transmission control solenoids.

Main

Code

Subcode

Meaning

Overcurrent, F-High solenoid circuit

Overcurrent, N and H-High solenoid circuit

Overcurrent, A-High solenoid circuit

Active Indicator Clearing Procedure:

Power down

Manual

Troubleshooting:

1. Probable cause is a wiring problem. A solenoid wire is probably shorted to ground or the solenoid

has a shorted coil which would cause an overcurrent condition. May also be an ECU problem.

2. Follow the troubleshooting steps for code 44 XX.

0021 0096