 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
AIR HORN AND VALVE REPLACEMENT - CONTINUED
0282 00
AIR HORN VALVE REMOVAL
1.
Release end of pull cord (22) from cab (20).
2.
Remove screw (24) and clamp loop (23) from cab (20). Remove clamp loop from pull cord (22).
NOTE
Tag tubes to aid in installation.
3.
Disconnect three tubes (17) and remove tee (25) and elbow (18) from valve (19).
4.
Remove two screws (21) and valve (19) from cab (20).
17
18
17
19
20
24
23
25
21
17
22
AIR HORN VALVE INSTALLATION
WARNINGS
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If adhesives
or sealing compound contacts skin or clothing, wash immediately with soap and water.
1.
Apply a light coat of pipe sealing compound to threads of elbow (18) and tee (25).
NOTE
Ensure valve is properly positioned to allow for mounting on cab.
0282 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals