 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
CAB DOOR ADJUSTMENT - CONTINUED
0267 00
ADJUSTMENT - CONTINUED
15.
Loosen torx screw (15) and add or remove shims (14) as necessary to center striker pin (13) and door latch jaws (12).
NOTE
Steps 16 through 19 must be performed from inside and outside of cab.
Repeat steps 16 until door fully closes without difficulty.
16.
Fully close cab door (9). If cab door was difficult to close or would not close, open cab door, loosen torx screw (15), and
move striker pin (13) inward.
17.
Tighten torx screw (15) to 37-42 lb-ft (50-57 Nm).
NOTE
Repeat steps 18 until door opens without difficulty.
18.
Open cab door (9). If cab door was difficult to open or would not open, loosen torx screw (15) and move striker pin (13)
outward.
19.
Tighten torx screw (15) to 37-42 lb-ft (50-57 Nm).
9
9
12
15
INWARD
OUTWARD
13
12
14
0267 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals