 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
CTIS WHEEL VALVE AND HOSE ASSEMBLY REPLACEMENT, REAR
(M916A3, M917A2) - CONTINUED
0214 00
INSTALLATION
1.
If bracket (4) was removed, position bracket on hub and install two hub nuts (10) and washers (11).
2.
Torque nuts to 155 lb-ft (210 Nm).
3.
Position wheel valve (7) on bracket (4) and install two bolts (8) and four washers (9).
4.
Install new air filter (6) with open end out in wheel valve (7).
WARNING
Ensure that all air lines and fittings are clear of debris and excess pipe sealing compound does not enter
air lines or fittings. Failure to follow this warning could result in injury to personnel and damage to
equipment.
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin
and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If
adhesive or sealing compound contacts skin or clothing, wash immediately with soap and water.
5.
Apply pipe sealing compound on adapter (5) threads.
6.
Install adapter (5) on wheel valve (7).
7.
Connect hose (3) to adapter (5) on wheel valve (7).
8.
Connect hose (3) to wheel port connector (2).
9.
Apply pipe sealing compound to adapter (14) threads.
10.
Install adapter (14) on wheel valve (7).
11.
Connect hose (15) to adapter (14) on wheel valve (7).
12.
Connect hose (15) to valve stem (1).
13.
Repeat steps 3 through 12 for other wheel valve.
14.
Start vehicle and check operation of CTIS (TM 9-2320-302-10).
END OF WORK PACKAGE
0214 00-3/(-4 Blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals