 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
FOOT BRAKE VALVE REPLACEMENT - CONTINUED
0203 00
INSTALLATION
1.
Lightly coat sliding surface of foot brake valve (13) plunger and adapter bore with silicone grease.
2.
Install foot brake valve (13) and new gasket (5) on firewall (4) with two washers (6) and screws (7).
WARNING
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin
and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If
adhesives or sealing compound contacts skin or clothing, wash immediately with soap and water.
Ensure all air lines and fittings are clear of debris and excess pipe sealing compound does not enter air
lines or fittings. Failure to follow this warning could result in injury to personnel or damage to equip-
ment.
3.
Lightly coat threads with pipe sealing compound and install elbow (12), three nipples (3), three check valves (8), two
plugs (9), three adapters (10), and nine elbows (2).
4.
Install tube (11). Connect 10 tubes (1) to elbows (2) and adapters (10).
5.
Connect foot brake valve plunger rod to brake pedal (WP 0172 00).
6.
Start vehicle and build air pressure (TM 9-2320-302-10). Check for leaks.
END OF WORK PACKAGE
0203 00-3/(-4 Blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals