 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
AIR DRYER REPLACEMENT (M915A3) - CONTINUED
0198 00
INSTALLATION
1.
Install air dryer (4) to air dryer bracket (10) with three spacers (9), washers (12), and screws (11). Tighten screws to 22-
30 lb-ft (30-40 Nm).
WARNING
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harm-
ful to skin and clothing. To avoid injury or death, keep away from open fire and use in a well-
ventilated area. If adhesives or sealing compound contacts skin or clothing, wash immediately
with soap and water.
Ensure all air lines and fittings are clear of debris and excess pipe sealing compound does not
enter air lines or fittings. Failure to follow this warning could result in injury to personnel or
damage to equipment.
2.
Lightly coat threads of fittings with pipe sealing compound before they are installed.
3.
At side of air dryer (4), install two elbows (6).
4.
Connect two air hoses (5) to two elbows (6).
5.
At front of air dryer (4), install adapter (3) and elbow (2).
6.
Connect air tube (1) to elbow (2).
7.
Connect connector (7) of chassis wiring harness (8) to air dryer (4).
8.
Install rear platform (WP 0261 00).
END OF WORK PACKAGE
0198 00-3/(-4 Blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals