 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
REAR GLADHAND REPLACEMENT (M915A3 NEW MODEL, M916A3, M917A2) - CONTINUED
0195 00
INSTALLATION
WARNING
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin
and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If
adhesives or sealing compound contacts skin or clothing, wash immediately with soap and water.
Ensure all air lines and fittings are clear of debris and excess pipe sealing compound does not enter air
lines or fittings. Failure to follow this warning could result in injury to personnel or damage to equip-
ment.
NOTE
To install gladhand packing ring, perform steps 6 and 7 only.
1.
Lightly coat threads of bulkhead fitting (12) with pipe sealing compound. Install bulkhead fitting to gladhand (11).
2.
Install label (6) and bulkhead fitting (12) with gladhand (11) to taillight bracket (5) with lockwasher (4) and nut (3).
3.
Install connector (2) to bulkhead fitting (10).
4.
Connect air tube (1) to connector (2).
5.
Install dummy coupling (9) to gladhand (11) with chain.
6.
Install plate (7) with two screws (8) attaching chain end with either screw.
7.
If removed, install new packing ring (10) to gladhand (11). Ensure packing ring is installed flat without twists or bulges.
1
2
3
4
5
6
7
8
9
12
11
10
END OF WORK PACKAGE
0195 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals