 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
CAB AIR JUNCTION BLOCK REPLACEMENT - CONTINUED
0191 00
REMOVAL - CONTINUED
15
16
17
13
14
15
17
15
13
19
20
8
16
18
13
13
14
17
20
19
13
INSTALLATION
WARNINGS
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin
and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If
adhesives or sealing compound contacts skin or clothing, wash immediately with soap and water.
Ensure all air lines and fittings are clear of debris and excess pipe sealing compound does not enter air
lines or fittings. Failure to follow this warning could result in injury to personnel or damage to equip-
ment.
1.
Coat threads with pipe sealing compound and install 13 connectors (13), four sending units (15), three elbows (17), and
three pipe plugs (14) in cab air junction block (8).
2.
Apply caulking compound to mating surface of cab air junction block (8).
3.
Install cab air junction block (8), ground wire (18), three washers (19), screws (20), and new locknuts (16).
4.
Install two wires (12) with new locknuts (11).
5.
Connect three plug connectors (10) and eight tubes (9).
6.
Connect six tubes (6) and oil line (7) to cab air junction block (8).
0191 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals