 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
AIR TUBE REPLACEMENT - CONTINUED
0188 00
REMOVAL - CONTINUED
1.
Remove nut (2) from fitting (5).
2.
Remove air tube (1) from fitting (5).
NOTE
If insert remains in fitting, do not remove. Cut air tube to remove ferrule.
3.
Remove insert (4), ferrule (3), and nut (2) from air tube (1). Discard ferrule.
5
4
3
2
1
INSTALLATION
1.
Position nut (2), new ferrule (3), and insert (4) on air tube (1).
WARNING
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin
and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If
adhesives or sealing compound contact skin or clothing, wash immediately with soap and water.
Ensure all air lines and fittings are clear of debris and excess pipe sealing compound does not enter air
lines or fittings. Failure to follow this warning could result in injury to personnel and damage to equip-
ment.
2.
Lightly coat threads of fitting (5) with pipe sealing compound. Install fitting on air tube (1).
3.
Install nut (2) on fitting (5).
4.
Start vehicle and build air pressure (TM 9-2320-302-10). Check for leaks.
0188 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals