 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
DRIVELINE MAINTENANCE (M915A3 NEW MODEL, M916A3, M917A2) - CONTINUED
0166 00
DRIVELINE REMOVAL
1.
Make matchmarks at each end of driveline and adjoining components to aid in installation.
2.
Support driveline (2).
3.
For front axle disconnection of driveline (2), remove eight bolts (6), washers (7), and nuts (8) from flange yoke (1).
4.
For each yoke disconnection of driveline (2), remove four screws (5) and two bearing retainers (4). Discard screws and
bearing retainers.
5.
Pry bearing (3) from yoke.
6.
Remove driveline (2) from vehicle.
3
2
1
4
5
6
7
8
DRIVELINE INSTALLATION
1.
Position driveline (2) in accordance with matchmarks made during removal.
2.
For each yoke connection, install two bearing retainers (4) and four new screws (5) securing bearing (3) to yoke.
Tighten screws to 28 lb-ft (38 Nm).
3.
For front axle connection of driveline (2), install eight bolts (6), washers (7), and nuts (8). Tighten bolts to 11-14 lb-ft
(15-19 Nm).
4.
Lubricate driveline (WP 0023 00).
0166 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals