 |
|||
|
|
|||
|
Page Title:
MAIN WIRING HARNESS AND FUSE REMOVAL - CONTINUED |
|
||
| ||||||||||
|
|
 TM 9-2320-302-20-2
AUTOMATIC ETHER STARTING AID WIRING HARNESSES AND FUSE
REPLACEMENT - CONTINUED
0149 00
MAIN WIRING HARNESS AND FUSE REMOVAL - CONTINUED
3.
Remove screw (7) and terminal (6) of main harness (1) from side of engine.
4.
Remove nut (8) and terminal (9) of main harness (1) from starter.
5.
Disconnect main harness connector (16) from jumper harness connector (15).
6.
Remove main harness (1) from vehicle.
7.
Disconnect connector of main harness (1) and remove fuse (17).
JUMPER WIRING HARNESS REMOVAL
1.
Disconnect jumper harness connector (15) from main harness connector (16).
2.
Disconnect jumper harness connector (13) from ECU connector (14).
3.
Disconnect jumper harness connector (11) from ECU harness connector (10).
4.
Remove jumper harness (12) from vehicle.
8,9
6
7
10
17
1
16
15
14
13
11
12
MAIN WIRING HARNESS AND FUSE INSTALLATION
1.
Install fuse (17) and connect connector of main harness (1).
2.
Position main harness (1) on vehicle.
3.
Connect main harness connector (16) to jumper harness connector (15).
4.
Install terminal (9) of main harness (1) to starter with nut (8).
5.
Install terminal (6) of main harness (1) to side of engine with screw (7).
6.
Connect main harness connector (5) to valve harness connector (4).
0149 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals