 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
COLLISION WARNING SYSTEM (CWS) DRIVER DISPLAY UNIT (DDU)
REPLACEMENT (M915A3, M916A3) - CONTINUED
0137 00
REMOVAL - CONTINUED
3.
Disconnect wiring harness connector (7) from DDU (5).
4.
Remove DDU (5) and mounting bracket (8) from instrument panel cover (2).
5.
Remove tiedown strap (6) and discard. Loosen two setscrews and remove DDU (5) from mounting bracket (8).
2
5
6
7
8
INSTALLATION
1.
Install DDU (5) to mounting bracket (8) and tighten two setscrews. Install new tiedown strap (6).
2.
Connect wiring harness connector (7) to rear of DDU (5).
3.
Position DDU (5) and mounting bracket (8) through opening in instrument panel cover (2).
NOTE
Ensure that two clip-on nuts are positioned on mounting bracket before installing torx screws in step 4.
4.
Secure DDU (5) with two torx screws (3) and clip-on nuts (4).
5.
Install instrument panel cover (2) with five torx screws (1).
0137 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals