 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
FRONT BLACKOUT DRIVE LIGHT REPLACEMENT - CONTINUED
0098 00
REMOVAL - CONTINUED
5.
Remove nut (11), lockwasher (12), ground wire (10), and blackout drive light (9) from mounting bracket (13). Discard
lockwasher.
6.
Remove grommet (1) and pull blackout drive and marker light wires through fender (8) while removing blackout drive
light (9).
7.
If damaged, remove three locknuts (14) washers (15), screws (16), and mounting bracket (13) from fender (8). Discard
locknuts.
10
9
11,12
13
8
14,15,16
INSTALLATION
1.
If removed, install mounting bracket (13) to fender (8) with three screws (16), washers (15), and new locknuts (14).
NOTE
Ensure that wire loom is installed over wires before wires are fed through fender.
2.
Feed blackout drive and marker light wires through grommet (1) and fender (8). Seat grommet in fender.
3.
Install blackout drive light (9) and ground wire (10) to mounting bracket (13) with new lockwasher (12) and nut (11).
0098 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals