 |
|||
|
|
|||
|
Page Title:
HEADLIGHT INSTALLATION - CONTINUED |
|
||
| ||||||||||
|
|
 TM 9-2320-302-20-2
HEADLAMP AND HEADLIGHT REPLACEMENT - CONTINUED
0097 00
HEADLIGHT INSTALLATION - CONTINUED
WARNING
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If adhesives
or sealing compound contacts skin or clothing, wash immediately with soap and water.
2.
Apply adhesive to mating surface of headlight assembly (16). Install headlight assembly on vehicle with eight screws
(15).
3.
Install clamp (17) and screw (8) on headlight assembly (16).
4.
Install clamp (12) on bracket (14) with washer (11), screw (10), and new locknut (13).
5.
Connect connector (9) on wiring harness (7).
HEADLAMP INSTALLATION
NOTE
Procedure is the same for all headlamps.
1.
Connect and install headlamps (3) on vehicle.
2.
Install headlamp retainers (2) on headlamps (3) and four screws (1).
3.
Connect connector (4) of cab wiring harness to rear of bezel (6) and position bezel on vehicle.
4.
Install four screws (5) on bezel (6).
5.
Adjust headlamps (3) (WP 0096 00).
3
1
2
1
4
2
3
6
5
END OF WORK PACKAGE
0097 00-3/(-4 Blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals