 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
UPPER RIGHT DASH PANEL REPLACEMENT - CONTINUED
0076 00
REMOVAL
1.
Remove five screws (8) and pull panel (7) away from dash enough to access rear of panel.
NOTE
Perform steps 2 and 3 on M916A3 and M917A2.
2.
Remove connector (3) from PTO switch (10).
3.
Depress tangs on PTO switch (10) and remove PTO switch from panel (7).
NOTE
Perform steps 4 through 6 on M915A3 New Model, M916A3, and M917A2.
4.
Remove connector (31) from 12V power receptacle (13)
5.
Remove 12V power receptacle (13) from cap assembly (12).
6.
Remove cap assembly (12) from panel (7).
7.
Remove connector (1) from light switch (2).
8.
Remove four screws (11), and light switch (2) from panel (7).
9.
As required, remove three screws (4), knobs (5), and washers (6) from light switch (2).
10.
Remove two connectors (27) from switches (26).
11.
Remove three fiber optic labels (25) from panel (7).
12.
Remove three label holders (18), two nuts (17), and two switches (26) from panel (7).
13.
Remove two tubes (22) and connector (24).
0076 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals