 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
RIGHT PANEL GAGES AND LAMPS REPLACEMENT - CONTINUED
0075 00
REMOVAL - CONTINUED
6.
Remove four lamp holders (11) from fuel level gage (8), transmission oil temperature gage (6), and two air pressure
gages (3 and 7).
7.
Remove four locknuts (19), ground wire (20), two brackets (21), and two air pressure gages (3 and 7) from panel (1).
8.
Remove four nuts (14), washers (13), two brackets (12), fuel level gage (8), and transmission oil temperature gage (6)
from panel (1).
9.
Remove two screws (5) and air cleaner restriction indicator gage (4) from panel (1).
10.
Turn four lamps (10) to left and remove from lamp holders (11).
INSTALLATION
1.
Install four lamps (10) in lamp holders (11). Turn lamps to right to lock in place.
2.
Install air cleaner restriction indicator gage (4) on panel (1) with two screws (5).
3.
Install fuel level gage (8) and transmission oil temperature gage (6) on panel (1) with two brackets (12), four washers
(13), and nuts (14).
4.
Install two air pressure gages (3 and 7) on panel (1) with two brackets (21), ground wire (20), and four new locknuts
(19).
5.
Install four lamp holders (11) on fuel level gage (8), transmission oil temperature gage (6), and two air pressure gages (3
and 7).
6.
Install two tubes (9) to air pressure gages (3 and 7). Connect tube (18) to air cleaner restriction indicator gage (4).
7.
Install two connectors (15) on fuel level gage (8) and transmission oil temperature gage (6).
8.
Install connector (16) on cab wiring harness connector (17).
9.
Install panel (1) on dashboard with four screws (2).
10.
Start vehicle (TM 9-2320-302-10). Check gages and lights for proper operation.
END OF WORK PACKAGE
0075 00-3/(-4 Blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals