 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
WATER PUMP REPLACEMENT - CONTINUED
0060 00
REMOVAL - CONTINUED
2
1
3
4
5
10
7
9
8
6
INSTALLATION
1.
Apply a light coat of clean lubricating oil to new gasket (4) and install gasket into groove of water pump (3).
2.
From underneath vehicle, position water pump (3) to gear case (5) of engine. Ensure gears are properly meshed.
3.
Install two long bolts (1) and one short bolt (2). Tighten bolts to 43-54 lb-ft (58-73 Nm).
4.
Install drain plug (6) to bottom of water pump (3).
5.
Install adapter (7) and elbow (10) to water pump (3).
6.
Connect heater hose (9) to elbow (10) with spring clamp (8).
7.
Install radiator-to-water pump elbow (WP 0047 00 or WP 0048 00).
8.
Install water pump-to-transmission oil cooler elbow (WP 0047 00 or WP 0048 00).
9.
Install water pump-to-thermostat housing hose (WP 0047 00 or WP 0048 00).
10.
Install coolant overflow reservoir-to-water pump tube (WP 0047 00 or WP 0048 00).
11.
Install engine oil level dipstick tube (WP 0025 00).
12.
Fill cooling system (WP 0046 00).
END OF WORK PACKAGE
0060 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals