 |
|||
|
|
|||
|
Page Title:
AIR CLEANER AND INTAKE DUCT DISASSEMBLY |
|
||
| ||||||||||
|
|
 TM 9-2320-302-20-2
AIR CLEANER, AIR INTAKE DUCT, AND TURBO BYPASS VALVE MAINTENANCE - CONTINUED
0040 00
AIR CLEANER AND INTAKE DUCT DISASSEMBLY
Remove six locknuts (22), washers (21), and air cleaner (1) from air intake duct assembly (14). Discard locknuts.
22
14
21
1
AIR CLEANER AND INTAKE DUCT ASSEMBLY
CAUTION
Ensure air cleaner and air intake duct assembly have been thoroughly cleaned. DO NOT leave any dirt or
foreign matter inside air cleaner or air intake duct assembly. Dirt or other foreign matter may get into turbo-
charger or engine and cause damage to equipment.
Install air cleaner (1) on air intake duct assembly (14) with six washers (21) and new locknuts (22).
AIR CLEANER AND INTAKE DUCT INSTALLATION
1.
Install air cleaner (1) and intake duct assembly (14) with four new locknuts (15), washers (16), and screws (12). Torque
locknuts to 25-35 lb-ft (33-47 Nm).
2.
Position hose clamps (9 and 11), hose (10), and tube assembly (6) on air intake duct assembly (14). Tighten hose
clamps.
3.
Install screw (7), washer (8), and new locknut (13) on tube assembly (6).
4.
Install tube adapter (5) and tubing (4) on tube assembly (6).
5.
Position elbow (18) and hose clamps (17 and 19) on air cleaner (1) and air duct tube (20). Tighten hose clamps.
0040 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals