 |
|||
|
|
|||
|
Page Title:
FUEL FILTER ELEMENT REMOVAL |
|
||
| ||||||||||
|
|
 TM 9-2320-302-20-2
FUEL STRAINER AND FILTER ELEMENT REPLACEMENT - CONTINUED
0034 00
FUEL FILTER ELEMENT REMOVAL
1.
Turn fuel shut-off valve (1) to OFF position.
WARNING
DO NOT perform fuel system checks, inspections or maintenance while smoking or near fire, flames or
sparks. Fuel may ignite, causing injury or death to personnel and damage to vehicle.
Fuel vapors are toxic. Avoid prolonged exposure or breathing of fumes. Work in a well-ventilated area.
Failure to follow this warning could result in serious injury to personnel.
Personnel must wear fuel-resistant gloves when handling fuels. If exposed to fuel, promptly wash
exposed skin and change fuel-soaked clothing.
2.
Remove filter element (9) and gasket (11) from adapter (10). Discard filter element and gasket.
FUEL FILTER ELEMENT INSTALLATION
1.
Lightly coat new gasket (11) with lubricating oil. Set gasket aside.
2.
Fill filter element (9) 2/3 full with clean diesel fuel.
3.
Install new gasket (11) and filter element (9) on adapter (10) until gasket just contacts adapter.
4.
Tighten filter element (9) by hand additional 1/2 turn.
5.
Turn fuel shut-off valve (1) to ON position.
1
9
10
11
6.
Prime fuel system (TM 9-2320-302-10).
7.
Start engine and check for leaks (TM 9-2320-302-10).
END OF WORK PACKAGE
0034 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals