 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
AIR COMPRESSOR REPLACEMENT - CONTINUED
0031 00
INSTALLATION - CONTINUED
WARNING
Air compressor is heavy. Use caution during installation to prevent injury to personnel.
4.
Slide air compressor (11) over threaded stud (22) and install nut (24). Hand tighten nut.
5.
Install four bolts (20) and one bolt (23) on air compressor (11). Hand tighten bolts.
6.
Torque nut (24), four bolts (20), and bolt (23) to 75-93 lb-ft (101-126 Nm).
7.
Install support bracket (17) on air compressor (11) with two bolts (15). Hand tighten bolts.
8.
Install two bolts (16) and torque to 43-45 lb-ft (58-73 Nm).
9.
Torque two bolts (15) to 156-204 lb-in (18-23 Nm).
10.
Install elbow (7) on engine block (6).
11.
Slide two hose clamps (8) on coolant inlet hose (9) and position coolant inlet hose on elbows (7 and 10).
12.
Slide one hose clamp (8) to each end of coolant inlet hose (9) and tighten.
13.
Install oil supply hose (19) on elbow (18).
14.
Slide hose clamp (13) on coolant outlet hose (12) and install coolant outlet hose on elbow (14). Tighten hose clamp.
15.
Slide hose clamp (2) on air inlet hose (3) and install air inlet hose on pipe flange (1). Tighten hose clamp.
16.
Install air supply hose (5) on elbow (4).
3
5
2
1
4
11
8
10
9
8
6
12
7
13
15
14
24
23
16
17
18
22
21
19
20
0031 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals