 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
ENGINE OIL FILTER ELEMENT REPLACEMENT (M915A3 OLD MODEL) - CONTINUED
0026 00
REMOVAL - CONTINUED
1.
Place drain pan under two filter elements (2) to catch oil.
2.
Remove two filter elements (2) with gaskets (3) from oil cooler adapter (1). Discard oil filter elements and gaskets.
1
3
2
INSTALLATION
1.
Lightly coat two new gaskets (3) with clean lubricating oil.
2.
Fill two new oil filter elements (2) with clean lubricating oil.
CAUTION
DO NOT use filter wrench for installation. Failure to follow this caution will result in damage to new filter.
3.
Install oil filter elements (2) on oil cooler adapter (1) by hand until gaskets (3) touch oil cooler adapter.
4.
Tighten oil filter elements (2) an additional 2/3 turn.
5.
Check oil level and add oil if required (TM 9-2320-302-10).
END OF WORK PACKAGE
0026 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals