 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
ENGINE OIL LEVEL DIPSTICK, TUBE AND ADAPTER REPLACEMENT - CONTINUED
0025 00
REMOVAL- CONTINUED
NOTE
Perform step 6 only if standoff bracket is damaged.
6.
Remove nut (1), two washers (2), screw (7), and standoff bracket (5) from engine block (6).
INSTALLATION
NOTE
Perform step 1 only if standoff bracket was removed.
1.
Install standoff bracket (5) on engine block (6) with two washers (2), screw (7), and nut (1).
WARNING
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If adhesive or
sealing compound contacts skin or clothing, wash immediately with soap and water.
2.
Lightly coat threads of engine block adapter (12) with pipe sealing compound. Engine block adapter in engine block (6).
Tighten engine block adapter to 168-216 lb-in (19-24 Nm).
3.
Position cable clamp (11) on dipstick tube (9).
4.
Install dipstick tube (9) on engine block adapter (12).
5.
Install cable clamp (11) on standoff bracket (5) with screw (10), two washers (4), and new locknut (3).
6.
Insert oil level dipstick (8) into dipstick tube (9) and turn clockwise until locked.
9
12
7
4
3
11
11
1
10
4
2
5
6
8
13
9
342-258
Install transmission oil cooler (WP 0161 00 or WP 0162 00).
7.
END OF WORK PACKAGE
0025 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals