Table 1. Unit Preventive Maintenance Checks and Services (PMCS) for the M915 Family of Vehicles - Continued

TM 9-2320-302-20-2

Table 1. Unit Preventive Maintenance Checks and Services (PMCS)

for the M915 Family of Vehicles - Continued.

LOCATION

ITEM TO

ITEM

MAN-

CHECK/

NOT FULLY MISSION

NO.

INTERVAL HOURS

SERVICE

PROCEDURE

CAPABLE IF:

a. Position vehicle so that fill hole

Semi-

0.2

Front Axle

plug (24) being removed is

Wheel End,

annual

above center line of wheel end.

Lubrication

(M916A3 and

M917A2)

b. Remove level control plug (25)

and seal. Oil should be level

with bottom of plug opening.

c. If oil level is low, remove fill

hole plug (24) and add oil

(Items 26 through 28, WP 0305

00) until oil is level with bottom

of level control hole.

d. Clean, install, and tighten fill

plug (24) to 18-25 ft-lb.

e. Clean, install, and tighten seal

and level control plug (25) to 8

ft-lb.

0023 00-18