|
| |
CLASS II -
CLASS III -
TM 9-2320-270-10
Leakage of fluid great enough to form drops but not enough to cause drops
to drip from item being checked/inspected.
Leakage of fluid great enough to form drops that drip from the item being
checked/inspected.
b. Removing Engine Compartment Side Panels and Opening Hood
1. Unhook four side panel and hood fasteners (1) from truck frame and hood
panel (2) by pulling pull rings (3).
2. Raise hinged hook panel (2) and allow to rest on opposite hood panel.
3. Raise front of side panel (4) off of support (5) and slide forward to remove.
c. Installing Engine Compartment Side Panels and Securing Hood
1.
2.
3.
4.
Place side panel (4) into position and slide rearward onto support (6).
Raise front of side panel (4) and place on support (5).
Have the crew member raise hinged hood panel (2) from opposite side of engine com-
partment, to allow you to place it down over side panel (4).
Connect four side panel and hood fasteners (1), beginning with the lowest one, and
pull ring (3) down to secure.
TA220807
2-31
|
