|
| |
3-62
TM 9-2320-270-10
CHANGING A WHEEL AND TIRE ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVING AND INSTALLING A WHEEL AND TIRE ASSEMBLY
16
17
18
Spare wheel and tire
a. Check air pressure.
assembly ( 1 )
Front axle tires should
have 95 psi (650 kPa).
Rear axle tires should
have 85 psi (580 kPa).
b. Have ready for installation.
Check to be sure it will not roll.
If necessary, chock
Truck
tires.
NOTE
On left side of truck turn nuts clockwise to loosen.
On right side of truck turn nuts counterclockwise to
loosen.
Wheel to be taken
Ten lug nuts (3)
Using lug nut wrench, loosen.
taken off (2)
TA220956
|
