|
| |
TM 9-2320-270-10
Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
EXCESSIVE OR UNEVEN TIRE WEAR - CONTINUED
Step 2. Inspect for bent wheel (1).
If wheel (1) is bent, replace wheel and fire assembly (2) with
spare. Notify Organizational Maintenance.
Step 3. Check for loose wheel (1).
a. If wheel (1) is loose, tighten lug nuts (3).
b. If reason for tire wear has not been found, notify
Organizational Maintenance.
END OF PROCEDURE
STEERING
SHIMMIES OR WANDERS
Step 1. Check tire pressure.
Inflate or deflate tires when cool to 95 psi (650 kPa) bias tire
85 psi 580 kPa) radial tire front and pusher axle, and 85 psi
(580 kPa bias tire 70 psi (483 kPa) radial tire tandem axels.
Change 6
3-35
|
