|
| |
TM 9-2320-270-10
Troubleshooting – Continued
MALFLINCTION
TEST OR INSPECTION
CORRECTIVE ACTION
WHEELS, TIRES, AND HUBS
WHEEL WOBBLES
Step 1. Check for loose lug nuts (3), missing lugs (4) and lug nuts (3), and broken
lugs (4).
a. If lug nuts (3) are loose, tighten in order shown to insure
wheel (5) is centered on hub (6).
b. If lug nuts (3) are missing, replace.
c. If lugs (4) are broken or missing, notify Organizational
Maintenance.
Step 2. Check for bent wheel (5).
a. If wheel is bent, remove tire and wheel assembly (7) and
install spare in its place. See page 3-57. Notify Organi-
zational Maintenance of bent wheel (5).
b. If replaced wheel (5) still wobbles, notify Organizational
Maintenance.
END OF PROCEDURE
3-33
|
