|
| |
TM 9-2320-270-10
Troubleshooting – Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
LOW OR NO OIL PRESSURE
NOTE
OIL PRESSure gage should show 50 psi (345 kPa) within 10-15 seconds after
engine starts and 50-70 psi (345 to 483 kPa) at 1800 to 2100 rpm.
Step 1. Check engine oil level on dipstick (3).
a. If oil level is not between L (low) and F (full) marks, add
proper grade of oil to bring to L mark with engine cold, or
between L and F when engine is warm (see LO 9-2320-270-
12). Do not overfill.
b. If oil is at level it should be and OIL PRESSure gage still
shows low or no oil pressure, notify Organizational
Maintenance.
END OF PROCEDURE
3-13
|
