|
| |
TM 9-2320-270-10
Troubleshooting – Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE FAILS TO CRANK - CONTINUED
Step 4. Inspect for corroded, loose, and broken battery cables (7).
a. If cables (7) are corroded, clean with baking soda (item 23,
Appendix D) and water solution.
b. If cables (7) are loose or broken at batteries (8), ground (9),
or starter (10), notify Organizational Maintenance.
Step 5. Try to jump start engine with another 24 Vdc power source.
(See page 2-104).
a.
b.
If jump start works, batteries are discharged and alternator
may recharge them during operation.
If jump start does not work, or batteries do not recharge
during operation, notify Organizational Maintenance.
3-5
|
