|
| |
TM 9-2330-270-10
OPERATION OF AUXILIARY EQUIPMENT - CONTINUED
Using Jumper Cables for Jump Starting - Continued
5.
6.
7.
WARNING
Incorrect jumper cable hook-up will cause arcing and possible battery explo-
sion, personnel injury, and equipment damage.
CAUTION
Do not let vehicles or cables touch each other during jump starting. Equip-
ment damage may result.
Always connect negative cable to power source last and disconnect first to
prevent sparks and possible equipment damage.
Remove jumper cables (1) from M911 Truck Tractor stowage.
Attach red jumper cable (2) to power source, positive terminal (3) and to M911
Truck Tractor forward battery positive terminal (4). The M911 Truck Tractor is wired
series parallel.
Attach black jumper cable (5) to M911 Truck Tractor third battery from
terminal (6) and to power source negative terminal (7).
front negative
8. Start engine on vehicle with dead battery (power source vehicle engine off).
9. Disconnect jumper cables from both vehicles (negative cable first) when engine starts.
10. Stow cables.
2-104
|
