|
| |
TM 9-2320-270-10
OPERATING WINCHES – CONTINUED
Readying Winches for Operation
1.
2.
3.
4.
5.
6.
7.
8.
NOTE
See TM 9-2330-294-14 for instructions on preparing semitrailer for winching
operations.
Position M911 Truck Tractor and semitrailer.
Place main transmission range selector (1) in neutral (N) position.
Place auxiliary transmission shift lever (2) in neutral position.
Apply parking brake by pulling out PARKING BRAKE control (3).
Direct crew member to disconnect winch cable clevises (8) from anchors (9).
Move PTO control (4) to ENGAGE position.
Place main transmission range selector lever (1) in D position.
Check that PTO/AUX throttle indicator light (5) is on.
9. Move winch control panel throttle release safety switch (6) to ON position. Engine
throttle (7) is now operational at winch control panel.
2-94
|
