|
| |
TM 9-2320-270-10
STARTING AND WARM-UP AT TEMPERATURES ABOVE 40o F (4oC) -
CONTINUED
CAUTION
5.
6.
l
l
If engine fails to start within 30 seconds, discontinue cranking (release ignition
key switch) to prevent overheating starter motor. Allow starter motor to cool
1 to 2 minutes before cranking again. If engine fails to start in four tries, notify
Organizational Maintenance.
Do not rotate ignition switch key to start position while starter motor is still
turning from previous try. This could result in serious damage to starter motor.
Rotate ignition switch (1) key to ON position.
Check that low OIL pressure/high WATER temperature warning light (2) is on and listen for
buzzer sound. If not on, turn ignition switch (1) OFF and notify Organizational Maintenance.
7. Slightly depress accelerator pedal (3) and rotate ignition switch (1) key to START
position.
a. If engine starts, release key immediately.
b. If engine fires but does not start, release key immediately and try again to start.
2-66
|
