|
| |
TM 9-2320-270-10
Item
No.
52
Table 2-1. Preventive Maintenance Checks and Services Models M911
Interval
After
Location
Item to
Check/
Service
Tempera-
tures of
Hubs,
Drums,
Axles, Dif-
ferentials
and
Transfer
Crewmembers
Procedure
WARNING
Hubs, drums, axles, differen-
tials and transfer case may
be very hot after operation.
Avoid touching theaa items
with bare hands. Serious
burns may result.
Inspect these units for over-
heating immediately after vehi-
cle operation. Overheating of
these units can indicate low lu-
brication, defective or worn
parts that are inoperative or out
of adjustment.
NOTE
Check sight glass on pusher
axle hub for cracks. Be sure lu-
bricant is present and glass is
free from paint and grease.
Not Fully Mission
Capable If:
Excessive overheat-
ing of components is
evident.
2-62.3
|
