SWING CYLINDER DRIFTS. cont'd

TM 5-2420-224-20-1

Table 3-5. Troubleshooting (Cont)

Malfunction

Test or Inspection

Corrective Action

BACKHOE (SEE) (CONT)

Step 2. Check for damaged swing cylinder packing as follows:

NOTE

The pin, 8-10 in. (200-250 mm) in length, 1-1/2 in. (37.5 mm) in diameter, must be made

from rolled stock.

a. Start engine. Place swing tower in center position and install pin (1)

through swing tower (2) and backhoe mounting frame (3) to hold swing

tower (2) in center position.

3-304