|
|
TM 5-2420-224-20-1
Table 3-5. Troubleshooting (Cont)
Malfunction
Test or Inspection
Corrective Action
ELECTRICAL SYSTEM (CONT)
Step 3. Disconnect connector B (7) and check for +24 VDC between wire 41TL (8)
and ground.
If +24 VDC is not present, repair wiring 41TL between
connector B and fuse box 2.
If +24 VDC is present, reconnect connector B and go to step 4.
Step 4. Disconnect connector Y (9) and check for +24 VDC between wire 41TL (8)
and ground.
If +24 VDC is not present, repair wiring 41TL between
connector Y and connector B.
If +24 VDC is present, reconnect connector Y and go to step 5.
Step 5. Check for +24 VDC between wire 41TL (8) and ground at left taillight
connector (10).
If +24 VDC is present, replace rear composite stoplight/taillight
(page 4-190).
If +24 VDC is not present, repair wiring 41TL between left
taillight connector and connector Y.
3-203
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |