|
|
TM 5-2420-224-20-1
Table 2-1. Preventive Maintenance Checks and Services (Cont)
NOTE: Within designated interval, these checks are to be performed in the order listed.
INTERVAL DEFINITIONS
Q-Quarterly
S-Semiannually
A-Annually
Interval
Item
Item to be Inspected:
No.
Q
S
A
Procedure: Check for and have repaired, filled, or adjusted as needed.
WHEELS AND TIRES (CONT)
b. Check lug nuts for proper torque of 260 Ib-ft (350 N.m).
●
10
AIR BRAKE SYSTEM
●
Check brake system components for leaks and damage. Check all brake
hoses for wear, pinching, or interference. If any of these conditions are
found, replace or reposition hose. Replacement is mandatory for any
hose worn or chafed before vehicle use. Replacement is mandatory for
any hose that is leaking or has bulges.
11
TRANSMISSION
●
Check transmission for leaks, loose bolts, and obvious damage.
12
FRONT AXLE
●
Check for loose screws and missing or damaged mounting hardware.
13
REAR AXLES
●
Check for loose screws and missing or damaged mounting hardware.
14
SUSPENSION
●
a. Check coil springs for cracks or breaks.
●
b. Check torque of coil spring mounting bolts. Torque should be
103 Ib-ft (140 N.m).
●
c.
Change oil and filter in front suspension lockout system (HMMH).
15
FRAME AND CROSSMEMBERS
●
a. Inspect frame and side rails for cracks, breaks, bends, wear,
deterioration, and loose bolts.
Change 1
2-7
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |