EARTHMOVING, MATERIAL HANDLING COMPONENTS AND CONTROLS

5-2420-224-20-1

EARTHMOVING, MATERIAL HANDLING COMPONENTS AND CONTROLS

Front Loader (SEE). The front loader is used to scoop earth to construct fighting positions and

artillery and missile emplacements, to grade surfaces, and to backfill excavations made with the

backhoe.

Front Loader Controls (SEE). The front loader is equipped with two control levers located

between the seats in the cab. Pull up on the left lever to raise the loader bucket, push down on

the lever to lower the bucket, and push down past detent to activate the float feature. Pull up on

the right lever to curl the loader bucket back, push down on the lever to curl the bucket down.

Forklift (HMMH). The forklift loads and unloads palletized cargo with the aid of the front

suspension lockout system.

Forklift Controls (HMMH). The forklift is equipped with two control levers located between the

seats in the cab. Pull up on the left lever to raise the mast, push down on the lever to lower the

mast. Pull up on the right lever to tilt the mast back, push down on the lever to tilt the mast

forward. Press the button on the right lever and pull up to rotate the carriage clockwise, press the

button and push down to rotate the carriage counterclockwise.

1-14