Operation of Stabilizers.

TM 5-2420-224-10

(g) Activate HI/LO engine RPM switch. Using tilt control lever (15), lower backhoe into transport position until it

snaps into boom lock and engages firmly. Deactivate HI/LO engine RPM switch.

(h) Depress clutch pedal (9) and disengage PTO lever (10).

(i) Engage clutch and raise and secure front loader bucket travel locks.

(15) Operation of Stabilizers.

WARNING

Stabilizers must be on level plane relative to one another. Failure to heed warning could

result in personal injury.

CAUTION

Always position stabilizer pads for maximum stability when backhoe is not operating

next to an unmovable object. Failure to do so could result in equipment damage.

Exercise care when swinging backhoe completely to one side. In some positions,

backhoe can contact stabilizers and cause equipment damage.

2-99