Backhoe Operation. (Cont) - TM-5-2420-224-100128

TM 5-2420-224-10

CAUTION

Always position stabilizer pads for maximum stability when backhoe is not

operating next to unmovable object. Failure to do so could result in equipment

damage.

Exercise care when swinging backhoe completely to the side. In some positions,

backhoe can contact stabilizers and cause damage.

(g)

Lower stabilizers with control levers (1 and 5) until stabilizers are extended and slightly lift rear of

vehicle.

(h)

Using swing control pedals (7 and 8), swing backhoe to center position.

(i)

Release tension on boom lock by moving boom control lever (4) out. Lift boom lock by pushing

boom lock latch lever (6) to the right.

(j)

Pull back on boom control lever (4).

(k)

Backhoe is ready for operation.

(10) Digging with Backhoe.

WARNING

Before starting work in new area, walk around and look for holes or obstructions.

Failure to find hidden holes or obstructions could result in an accident and injury.

Before operating backhoe in area where your visibility is reduced (next to a

building, etc.), install guard rail and warning signs to keep other personnel away

from your machine. Failure to do so could result in personnel injury.

2-92

Change 1