 |
|||
|
|
|||
|
Page Title:
Table 2-1. Preventive Maintenance Checks and Services for SEE/HMMH (Cont) |
|
||
| ||||||||||
|
|
 TM 5-2420-224-10
Table 2-1. Preventive Maintenance Checks and Services for SEE/HMMH
Item
Interval
Crewmember
Not Fully Mission
No.
Procedure
Location
Capable If:
Item to
Check/
Service
NOTE
15
Before
Front Loader
(SEE)
The following NMC criteria
(items a through c) only
apply if the front loader is
required to perform your
daily mission.
a. Inspect front loader controls and linkage
a. Front loader controls and
for loose, missing hardware or binding.
linkage are binding.
b. Visually check for loose or missing
b. Parts are missing or
bolts, fittings, hoses, digging teeth, and
mounting points are cracked
shanks.
Check for cutting edges and
or damaged.
mounting points.
c. Damage that will impair
c. Check front loader frame assembly and
operation or broken welds.
lift arm assembly bucket for physical
damage or broken welds.
d. Verify all safety travel bars, locking
d. Travel
bars,
locking
devices, safety pins, and latches are
devices, safety pins are
present and implements are securely locked
missing or damaged and
in travel position (refer to page 2-87).
latches are locked.
NOTE
16
Before
Assembly
The following NMC criteria
(HMMH)
(items a through c) only
apply if the forklift is required
to
perform
your
daily
mission.
a. Parts are missing or
a. Visually check for loose or missing
mounting points are cracked
bolts, fittings, and hoses. Check mounting
or damaged.
points for security.
b. Check and make sure rotator electrical
harness is secured and properly connected.
2-34
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals