|
| |
TM 5-2420-222-34P
DIRECT SUPPORT AND GENERAL SUPPORT
MAINTENANCE REPAIR PARTS AND
SPECIAL TOOLS LISTS
SECTION I. INTRODUCTION
1.
Scope.
This RPSTL lists and authorizes spares and repair parts;
special tools; special test, measurement, and diagnostic
equipment
CTMDE);
and
other
special
support
equipment required for performance of Direct Support
and General Support Maintenance of the Loader
Backhoe
Wheeled
Tractor.
It
authorizes
the
requisitioning, issue, and disposition of spares, repair
parts and special tools as indicated by the source,
maintenance and recoverability (SMR) codes.
2.
General.
In addition to Section I. Introduction, this Repair Parts
and Special Tools List is divided into the following
sections:
a.
Section II. Repair Parts List. A list of
spares and repair parts authorized by this RPSTL for use
in the performance of maintenance. The list also
includes parts which must be removed for replacement
of the authorized parts. Parts lists are composed of
functional groups in ascending alphanumeric sequence,
with the parts in each group listed in ascending figure
and item number sequence. Bulk materials are listed in
item name sequence. Repair kits are listed separately in
their own functional group within Section II. Repair
parts for reparable special tools are also listed in the
section. Items listed are shown on the associated
illustration(s)/figure(s).
b.
Section III. Special Tools List A list of
special tools, special TMDE, and other special support
equipment authorized by this RPSTL (as indicated by
Basis of Issue (BOI) information in DESCRIPTION AND
USABLE ON CODE column) for the performance of
maintenance.
c.
Section IV Cross-reference Indexes. A list,
in National Item Identification Number (NIIN) sequence,
of all National stock numbered items appearing in the
listing, followed by a list in alphanumeric sequence of all
part numbers appearing; in the listings. National stock
numbers and part numbers are cross-referenced to each
illustration/figure
and
item
number
appearance.
The figure and item number index lists figure and item
numbers
in
alphanumeric
sequence
and
cross-
references NSN, CAGE, and part numbers.
3.
Explanation of Columns (Sections II and
III).
a.
ITEM NO. (Column (1)). Indicates the
number used to identify items called out in the
illustration.
b.
SMR CODE (Column (2)). The Source,
Maintenance, and Recoverability (SMR) code is a 5-
position
code
containing
supply/requisitioning
information, maintenance category authorization criteria,
and disposition instructions, as shown in the following
breakout:
*Complete Repair: Maintenance capacity, capability, and
authority to perform all corrective maintenance tasks of
the ’Repair" function in a use/user environment in order
to restore serviceability to a failed item.
(1)
Source Code. The source code tells you
how to get an item needed for maintenance, repair, or
overhaul of an end item/equipment. Explanations of
source codes follows:
1
|
